Specializing in the production of various carbon steel, stainless steel, color-coated, galvanized and other plates, coils, rods, pipe fittings, high nickel alloy steel products, and high temperature resistant products.
PRODUCTS
CONTACTS
If you are interested，please contact us by email
<strong>2036 aluminum</strong> this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good. <br> <strong>2036 aluminum alloy</strong> features: high strength, a certain heat resistance, can be used for working parts below 150℃.<br> <strong>The strength</strong> of 2036 alloy is higher than that of 7075 alloy.
<strong>1100 aluminum alloy</strong> is 99.0% ordinary industrial pure aluminum. <br> <strong>Heat treatment </strong>can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;<br> <strong> After anodic oxidation,</strong> the corrosion resistance can be further improved and a beautiful surface can be obtained.
<strong>1070 aluminum </strong>has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding. <br> <strong> Make use of its advantages</strong> to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
<strong>1100 aluminum alloy</strong> is 99.0% ordinary industrial pure aluminum. <br> <strong>Heat treatment </strong>can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;<br> <strong> After anodic oxidation,</strong> the corrosion resistance can be further improved and a beautiful surface can be obtained.
<strong>The main alloying elements in 6061 alloy</strong> are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. <br> <strong>Widely</strong> used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
<strong>6082 </strong> is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance. <br> <strong>It also has moderate</strong> strength and can maintain good operability after annealing.<br> <strong>It is mainly </strong> used in mechanical structure, including bars, plates, pipes and profiles.
<strong>7075-T6 aluminum </strong>alloy hardness is 150HB, belongs to the high hardness aluminum alloy.<br> <strong>7075T6 aluminum </strong>alloy is precision machined aluminum in the United States, one of the most commercially available alloys.<br> <strong>The main alloying</strong> element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.<br>
<strong>6063 aluminum </strong> alloy material. <br> <strong>The main alloy </strong> elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
<strong>7075 aluminum alloy</strong> is a cold - treated forging alloy, high strength, far better than mild steel. <br> <strong>7075 is one </strong> of the strongest alloys commercially available.<br> <strong>Under heat</strong> treatment, can achieve very high strength characteristics.
Tangshan Iron and Steel specializes in the production of various carbon steel, stainless steel, color-coated, galvanized and other plates, coils, rods, pipe fittings, high nickel alloy steel products, and high temperature resistant products.